The Utility Fogger II video describes the airflow characteristics for Pharma facility managers and semiconductor managers. The features and applications on the Clean Room Fogger which has replaced the Utility Fogger II, also called UFII, are noted below to support USP 797 Pharmaceutical In-Situ Airflow Analysis and Semiconductor requirements, such as clean rooms, glove boxes and isolator boxes.
The Utility Fogger II used 9 Sonicators to convert Di Water or WFI water to a small droplet water vapor, providing an inexpensive clean room fogger. WFI is a pharmaceutical water used in water for injection applications. DI Water Foggers are easy to use and provide visualization of airflow and turbulence with on/off fog control in clean spaces and around equipment.
Utility Fogger II visibility and Clean Room fogger visibility distances of 6 feet or more are controlled by air velocity and humidity around the fog. Clean room foggers produce a typical 65 to 68 degree F, visible vapor composed of DI water or WFI droplets (fog) at typical diameters of 8-10 micron droplet size. The fog is as clean as the DI Water or WFI Water that is used. DI water with a purity of 16 M Ohm is typical or you can use Distilled Pharma WFI water, also referred to as water for injection.
The Utility fogger and clean room fogger costs are lower than ultrapure foggers for budget requirements. Ultrasonic transducers of the Utility fogger, also referred to as the UFII fogger, convert DI water directly to droplets. Low water sensors protect the transducers during operation. The Cleanroom fogger was introduced to offer carry handles, operating instructions on the fogger panel, water fill level, rolling carry cart and Fog Curtain Tube. The visible fill level indicator to prevent water over fill.
As with WET Benches, the Clean Room Fogger enclosure is produced with a polypropylene material to provide a quick, easy wipe down of the fogger after use, while preventing fingerprints as encountered with products using SS enclosures. A handle is provided on top to provide easy carry of the fogger. A standard power supply is 220VAC or you can choose 110VAC for USA and Canada operation. A flexible, corrugated, white fog tube can be oriented in any direction for fog directional output, and extends from 24 inches to 72 or more inches. An optional Fog Curtain Tube is available to create a wall of fog, or simply use a fog tube to create a fog stream.
There is a rolling carry cart that protects the clean room fogger and accessories during transport and storage. For operator convenience the Operating Instructions, Application Notes and Specifications are labeled on the side of the fogger enclosure. 16 Meg Ohm, Di Water is typically used for Semiconductor applications and Pharmaceutical use. Distilled WFI water for Pharmaceutical applications can also be used in the Clean Room Fogger. Clean room foggers use DI Water for fog processing.
The Clean Room Fogger, Utility fogger, UFII, Utility Fogger II use Di Water and WFI, water for injection, to create fog. The foggers can be reviewed and you can get a Clean Room Fogger quote for your requirements.
Clean Room Fogger, Utility Fogger II Features:
- Supports USP 797 Pharmaceutical In-Situ Airflow Analysis
- Supports Semiconductor Clean Room requirementsVideo Airflow Patterns, Air Migration and Turbulence in clean rooms
- Polypropylene Enclosure: No Fingerprints as with SS, Easy to Clean
- Create Fog with Di Water and WFI Water
- Visualize Pharma Isolator & Glove Boxes, Fume Hood Performance
- Airflow Visualization of air patterns and turbulence
- Visualize Semiconductor Clean Room Pressure / Turbulence Issues
- Leak detection in air ducts using WFI Water for Injection
- Cleanroom laminar flow and turbulence tests
- Wet bench exhaust optimization
- Personal safety exhaust verification
- Chemical process equipment ventilation tests
- Pressure balancing between rooms and spaces
- Fill Level Indicator and Water Drain
- 6cfm of Fog for 60 Minutes Operation, Refill and Continue Fogging
- Optional Top Holding Handle Provides Convenient Carry of Fogger
- Fog Curtain Tube , Optional to create a Fog Curtain Wall
- Low Water Sensors for Transducer Protection
- Corrugated, White Fog Tube, 30 to 80 inches, 2.35 inches ID, 2.6 inches OD
On/Off Power Switch - CE Mark manufacturing
No comments:
Post a Comment